YSHIELD® STEEL-GRAY | Shielding fabric | Width 150 cm | 42dB

Description

Properties

STEEL-GRAY is a compact cotton/polyester/stainless-steel fabric for HF+LF shielding. Typical application as curtain, floor mat, sewn into a blanket, room dividers, or bedding.

Important: For clothing the steel threads aren´t as soft on the skin as of silver fabrics, it feels a little like a scratchy woolen sweater. Tip: If using as sheets wear pajamas or use an extra sheet between you and the fabric so it does not rub on your skin.

• Good screening attenuation, even at high frequencies!
• Excellent cost/performance ratio
• Contactable (groundable) to shield LF electric fields
• Textile characteristics: Washable, easy to iron and process

Attenuation | Grounding

• This product shields high frequency electromagnetic fields (HF). The indicated dB-values apply to 1 GHz, view chart for other frequencies. Laboratory report ranging from 40/600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006, view report below.
• This product with an electrically conductive surface shields low-frequency alternating electric fields (LF). For this purpose a grounding is necessary, i.e. an integration into the functional-equipotential bonding (FEB), please find suitable grounding accessories under “Grounding”.

Technical data

• Width: 150 cm, +/- 2 cm
• Length: Available by the meter
• Attenuation: 42 dB, two-layer 57 dB
• Color: Gray
• Raw materials: 40 % cotton, 30 % polyester, 30 % stainless steel
• Weight: 120 g/m²
• Dimension stability: +/- 3 %
• Surface conductivity: 100-800 ohm (square resistance)

Care instructions

• Washing up to 60°C
• Iron without steam at degree 1
• Drying at low temperature
• No bleaching
• No chemical dry-cleaning
• Wash only with our special washing detergent TEXCARE, without enzymes or bleaching agents

PRODUCT DATASHEET

ATTENUATION TEST REPORT